@ANY2400-SC USB Dongles

ANY2400-SC USB Dongle
Quantity Price
from 1 pcs. 63.64
from 10 pcs. 59.74
from 25 pcs. 53.30
from 50 pcs. 48.86


Price per Unit


@ANY2400-SC-Pro USB dongles are reliable, advanced,host-powered gateway solutions. Integrated design offers leading edge RF characteristics within a compact sized form factor. Antenna diversity mechanisms implemented via two on-chip ceramic antennas are perfectly matched, while minimizing RF interference losses. A special low noise amplifier front end module fires up the transmitters output power to 18 dBm, so that the incoming signal with even a minimal strength of -121 dBm becomes receivable.

The on-board UART chip facilitates easy serial connection setup via USB interface. Supported with off-the-shelf drivers by the commercially maintained FTDI Driver Suite, the USB 2.0 compliant interface ensures a seamless integration to various operating systems. White plastic enclosures are available as accessories on demand.

Ensure the quick setup by ordering the product preprogrammed with either our AT-command-based Smart MAC Suite firmware, your own firmware, or common stacks such as 6LoWPAN, Zigbee PRO or Lightweight Mesh.


Key Features

  • USB 2.0 compliant IEEE 802.15.4 -2006 based hardware platform within compact USB dongle format
  • Supports international 2.4 GHz ISM band
  • Commercially maintained FTDI Driver Suite ensures a seamless OS integration and support
  • Exceptional transmission characteristics by combining innovative RF technologies with advantageous antenna diversity
  • Outdoor range (line of sight) up to 2.5 km
  • Network topology: P2P, P2MP, Star, Tree, Mesh (IEEE802.15.4 and Zigbee PRO)
  • Other IEEE 802.15.4 based stacks applicable
  • Power and data transmission via standard USB connector and on-board FT234 UART/USB converter
  • Data rate: up to 2 Mbps, e.g. Zigbee: 250 kbps gross
  • Smart MAC Suite is provided for easy prototyping and quick setup


  • Self-contained, host-powered infrastructure solution to accelerate bring up, testing, monitoring and controlling of your IEEE 802.15.4 based wireless network
  • Easy development with ready-to-use AT-command-based Smart MAC Suite firmware, app examples, Development Kits and full technical support
  • Full EN300328, FCC CFR Part 15, RoHS and REACH compliance
  • USB connectivity is in line with maintained commercial driver suite by FTDI to ensure seamless infrastructure bring up and customization
  • Fast prototyping with preprogrammed firmware (SMS or other common stacks especially preconfigured for modules, e.g. Zigbee)
  • Simple data exchange via human readable console output is available to speed-up the system design
  • Integrated JTAG interface enables OTAU and serial flashing
  • Complementary enclosures pack available
Block diagram of @ANY2400-SC-Pro avanced plug-and-play USB Dongle-hosted gateway with antenna diversity and superior RF characteristics
RF Characteristics
Max. Transceiver Output Power up to 18 dBm EIRP
Receiver Sensitivity (per 1%) up to -121 dBm
Data Rate up to 2 Mbps (proprietary), e.g. 250 kbps @ Zigbee
Frequency international 2.4 GHz ISM Band, 16 channels
Data Encryption AES 128 supported
Modulation O-QPSK (IEEE 802.15.4 compliant)
Applicable Network Topologies P2P, P2MP, Tree, Star, Mesh and other IEEE 802.15.4 based topologies
Hardware Characteristics
Operating Temperature Range -40°C to +85°C
Microcontroller & Transceiver ATmega128RFA1 or
On-Chip Flash 128 kB (256 kB*)
On-Chip RAM 16 kB (32 kB*)
On-Chip EEPROM 4 kB (8 kB*)
Interfaces JTAG, USB 2.0
USB Interface FT234 USB
Optical Elements Status LED (programmable)
Connectivity USB Type-A plug
Electrical Characteristics
Voltage 5.0 V USB-powered
Radio Compliance EN300328, FCC CFR Part 15
Manufacturing RoHS & REACH
Ordering Information
Order Number AT-ANY-2400-SC-Pro USB Dongle
AT-ANY-2400-SC-Pro Enclosure Pack (white enclosure and cap)

*customization option on request

Go back